0086-18720959764
Language
Haituo_CN_Website > HaiTuo_EN_Website > News > >

News

Brazing refers to a welding method in which a solder and a weldment lower than the melting point of the weldment are simultaneously heated to the melting temperature of the solder, and the gap between the solid workpieces is filled with the liquid solder to connect the metal. In brazing, the oxide film and oil stain on the contact surface of the base metal are first removed to facilitate the capillary action after the solder is melted, and the wettability and capillary fluidity of the solder are...
Updated :2019-10-10
The working principle and application of high-frequency heating machine adopts MOSFET, IGBT power device and frequency conversion control technology, which is efficient, energy-saving and has higher output power. The power is selected according to power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the more the heat permeability. it is good;...
Updated :2019-10-10
Tooth quenching machine tools, as the name suggests, generally refer to special machine tools that use induction heating power sources for quenching processes. It has the advantages of high precision, good reliability, saving time and effort. Mainly consists of bed, slide table, clamping rotating mechanism, cooling system, quenching liquid circulation system, electrical control system and so on. Quenching machines are generally single-station (double-station quenching machines can be used for sm...
Updated :2019-10-10
How to choose induction heating equipment Induction heating equipment is based on the frequency of alternating current, the induction heating equipment can be divided into ultra high frequency (200-1500KHZ), high frequency (30-80KHZ), super audio (20-50KHZ), intermediate frequency (1-20KHZ) Four series. Taking quenching application as an example 1UHF induction heating equipment uses a current frequency of up to 1.5 MHz, and the heating layer is extremely thin, only about 1-2 mm. It can be used f...
Updated :2019-10-09
What is Induction Heating...
Updated :2019-10-09
What is Induction Heating? Haituo Electromechanical companies use electromagnetic induction for melting, heating and welding applications across multiple industries. But what exactly is induction? And how does it differ from other heating methods? To the typical engineer, induction is a fascinating method of heating. Watching a piece of metal in a coil turn cherry red in a matter of seconds can be surprising to those unfamiliar with induction heating. Induction heating equipment requires an unde...
Updated :2019-10-09
Stainless steel tube annealing machine which is good for stainless steel bright annealing, the line speed is 0-90 m / min; adapt to the pipe Φ3-Φ40mm, material SUS304, 316, 316L, etc.; with gas protection device, fast annealing, no deformation after annealing, etc. The refrigerator condenser tube on the market is basically annealed by our equipment, and can be annealed from one to ten at the same time....
Updated :2019-10-09
The use of gear high-frequency quenching equipment 1. Heat treatment industry: high-frequency quenching heat treatment of various power tool gear shafts; various gears, various forks, various spline shafts, transmission shafts, various small shaft crank pins, Various types of rocker arm, rocker arm shaft and other high-frequency quenching heat treatment; hardware tools high-frequency quenching heat treatment, such as vise, hammer, pliers, wrench. 2. Quenching and tempering of various workpieces,...
Updated :2019-10-09
 © 2020 Dongguan Haituo Electromechanical Equipment Co., Ltd. all rights reserved     粤ICP备14033160号-2  粤公网安备 44190002003728号